TiO₂: 95% Min
Origin: Sierra Leone
Particle Size: 60 Mesh / Other Sizes on Request
Packing: 1 MT Jumbo Bag
Loading Port: Qinzhou, China
COA: Available
Sample: Available for Evaluation
Hebei Maosheng supplies natural rutile sand with 95% TiO₂ grade for welding electrode and welding consumable production. Our Rutile 95% is primarily supplied for E6013 welding electrode coatings, welding flux and other welding applications.
The natural rutile feed material originates from Sierra Leone and is processed, screened and quality controlled in China through our long-term processing partners.
For welding electrode manufacturers, consistent TiO₂ content, controlled impurity levels and stable particle size distribution are important for production consistency and welding performance.
We can provide COA, chemical composition reports and particle size analysis for technical evaluation before order confirmation.
Natural rutile with 95% TiO₂ grade
Suitable for E6013 welding electrode production
Controlled chemical composition
Stable particle size distribution for welding applications
Sierra Leone natural rutile feed material
Processed and screened in China
Stable supply through long-term processing partners
COA and particle size analysis available
| Component | Representative Test Value |
|---|---|
| TiO₂ | 96.64% |
| SiO₂ | 0.57% |
| Al₂O₃ | 0.76% |
| TFe | 0.43% |
| ZrO₂ | 0.27% |
| V₂O₅ | 0.64% |
| Cr₂O₃ | 0.10% |
| MgO | 0.03% |
| MnO | 0.01% |
| P | <0.01% |
| S | <0.01% |
| Loss on Ignition (1025°C) | <0.05% |
Note: The above values are based on a representative third-party test report and are provided for reference. As natural rutile is a mineral product, actual values may vary slightly between production lots. Please contact us for the latest COA.
Product: 95% Natural Rutile Sand
Grade: TiO₂ 95% Min.
Nominal Size: 60 Mesh
| Particle Size | Retained (%) | Cumulative Passing (%) |
|---|---|---|
| +250 μm | 0.4% | 99.6% |
| +180 μm | 33.0% | 66.6% |
| +75 μm | 56.6% | 10.0% |
| -75 μm | 10.0% | — |
| Total | 100.0% | — |
The above particle size distribution is a representative specification for our 60 mesh natural rutile.
Other particle size options may be discussed according to welding electrode production requirements and current availability.
E6013 Welding Electrode Coating
Welding Electrode Manufacturing
Welding Consumables
Welding Flux Manufacturing
Flux-Cored Wire
Other industrial applications may be discussed according to specific chemical composition and particle size requirements.
The natural rutile feed material used for this grade originates from Sierra Leone.
We work with long-term processing partners in China for mineral selection, screening and particle size control.
Hebei Maosheng manages product selection, quality verification, inspection coordination and export arrangements to maintain stable supply for overseas customers.
| Item | Details |
|---|---|
| Product | Natural Rutile Sand |
| Main Grade | TiO₂ 95% |
| Standard Packing | 1 MT Jumbo Bag |
| MOQ | 1 × 20FT Container |
| Loading Port | Qinzhou Port, China |
| Monthly Supply Capacity | Up to 1,000 MT |
| Lead Time | Normally within 7 days after receipt of advance payment |
| Payment Terms | 30% T/T advance, 70% against copy of B/L |
| COA | Available |
| Particle Size Analysis | Available |
| Sample | Available for evaluation |
Loading quantity per container may vary depending on shipping requirements, container payload limitations and destination regulations.
Main grade on this page: Natural Rutile 95% TiO₂
Other natural rutile grades may also be available depending on current supply and application requirements, including:
Rutile Sand 92% TiO₂
Rutile Sand 90% TiO₂
Rutile Sand 87% TiO₂
Rutile Sand 85% TiO₂
Please contact us with your required TiO₂ content, particle size and application so that we can recommend a suitable grade.
Natural rutile is commonly used as a mineral component in welding electrode coatings.
For E6013 electrode manufacturers, both chemical composition and particle size distribution should be evaluated according to the electrode formulation and production process.
Our Natural Rutile 95% is supplied with technical documentation including chemical composition and particle size information to support customer evaluation.
Customers are welcome to provide their required TiO₂ content, impurity limits and sieve distribution for comparison with our available material.
Natural rutile sand is widely used in welding electrode coatings, welding flux and other welding consumables. Our 95% grade is primarily supplied for welding applications including E6013 electrode production.
The feed material for our Natural Rutile 95% originates from Sierra Leone and is processed and screened in China through our long-term processing partners.
This product is natural rutile, not synthetic rutile.
Our representative welding grade shown on this page has a nominal size of 60 mesh. Other particle size options may be discussed depending on application requirements and current availability.
Yes. We can provide a detailed particle size distribution report for technical evaluation.
Yes. COA and third-party chemical composition reports are available. Because natural mineral composition may vary slightly between lots, customers can request the latest available report before order confirmation.
Rutile is commonly used as a mineral component in welding electrode coatings. Its TiO₂ content and particle size distribution are important parameters considered by electrode manufacturers when evaluating raw materials.
Our Natural Rutile 95% is supplied for E6013 welding electrode applications. Final suitability should be confirmed by the customer's own formulation and production trial.
Our standard export packing is 1 MT jumbo bags.
Our standard MOQ is one 20FT container.
Our main export loading port is Qinzhou Port, China.
Yes. In addition to the 95% grade, other natural rutile grades such as 92%, 90%, 87% and 85% may be available depending on current supply.
For more information about natural rutile sand for welding electrode production, see our technical guides:
How Particle Size Distribution Affects Rutile Sand Performance in Welding Electrodes
How Welding Electrode Manufacturers Evaluate Rutile Sand Quality Before Purchase
Rutile Sand COA: What Buyers Should Check Before Placing an Order
Rutile Sand 92% TiO₂ for Welding Consumables
Rutile Sand 90% TiO₂ Industrial Grade
Ilmenite Sand 58% TiO₂ for Welding Industry
Ilmenite Sand 54% TiO₂ Titanium Ore
Zircon Sand for Foundry & Ceramic Applications
High Titanium Slag for Welding Production
If you are looking for Natural Rutile Sand 95% for welding electrode production, please send us your required:
TiO₂ grade
Particle size or sieve distribution
Application
Required quantity
Destination port
👉 COA and particle size analysis available
👉 Sample available for evaluation
👉 Send inquiry for the latest FOB or CIF quotation
For technical evaluation, sample discussion or quotation, please contact us directly.
